充气式护舷

 

Floating Pneumatic Fenders are mainly used in ship-to-ship (STS) and ship to dock/jetties (STD/J) projects. The floating pneumatic fender is also known as the Yokohama type Fender/Floating Fender/Dock Fender. These kinds of Yokohama Fenders became the world's leading anti-collision device.

Floating Pneumatic Fenders are fast and easy to install, keeping suitable clearances between the hull and the jetty or vessels. These ship fenders played a critical role on the safe operation of ship berthing.

 

 

 SUPERIOR GUARANTEE  SUPREME GUARD

NANHAI pneumatic fenders has the lowest single-application cost in the industry

Floating pneumatic fenders application cost depends on service life and usage frequency. High-performance NANHAI pneumatic fenders can minimize the single-application cost of users.

图片2图片2

 

 

安全且可靠的性能


The safety factor adopted in the design of this fender is based on accepted theory and has been proven by extensive experimentation.Operational experience over a long period of time attests to its high safety and reliability,and hydraulic pressure tests have proven the strength to be suitable.

 

Application in harshest conditions


Supply of high quality and reliable fenders that can perform effectively even under the harshest environmental conditions. It is therefore extremely crucial for each pneumatic fender to comply with the ISO 17357-1:2014.Application environment is bad,strong wind and waves.Fender compression over 70% still keep superior performance to fully protect ship,not burst. #LargeVessel #StrongWaves #StrongWind

Pneumatic fenders durability


Reliant on the compressive elasticity of air, Nanhai floating pneumatic fenders show no deterioration or variation in performance due to fatigue or extremely low temperatures (-50°C and below) thereby negating the need for owners to make regular replacements.

安装简单且安装成本低廉,护舷在水中由自身重量支撑。因此,它可以通过拉索或链条轻松系泊,也可以轻松移除以转移到另一个系泊点。

 

 

更大尺寸的充气式护舷 


Floating Pneumatic Fenders' diameter is 300 mm minimum and the maximum will be 4,500 mm. The range of lengths are 500 mm to 12,000 mm, as well as special sizes. The sling-type or chain & tire net(CTN) are available for both sizes.

 

 

Customized floating pneumatic fenders


  • NANHAI could supply normal size floating pneumatic fender,meanwhile we could manufacture any size to meet user's requirements.The picture shows product is D3.3*L12.7m special size fender.
  • 颜色通常是黑色和灰色(海军),如果您需要更多,我们可以提供定制服务。

Features of Yokohama floating pneumatic fenders

  • 完全符合 ISO 17357 和 PIANC 2014 标准
  • 通过材料和静水压力不规则性的综合测试
  • 通过角度和耐久性性能评估
  • 清楚地标有所有相关标识
  • 完成最新的认证
  • 有多种尺寸可供选择
  • 由内橡胶层、加强帘线层和外橡胶层构成
  • 更厚的外表层取代了普通护舷的外表层
  • 为直径 2.5m 以上的充气式护舷配备安全阀

Benefits of Yokohama floating pneumatic fenders

  • Outstanding return on investment due to durable and long-lasting material
  • Justified reassurance: rigorously tested, fully certified products from long-established and globally recognised manufacturer
  • 产品可适应恶劣的海洋环境,因此保养所需花费较低
  • 即使超载,仍然能保护船舶和系泊设施
  • 保证可靠性,无论遭遇老化或极端温度,性能始终如一 
  • 适用于具有不同尺寸的各类型船只的船靠岸和船靠船应用
  • 只需一根拉绳或链条,安装起来既简单又经济
  • 可轻松转移到其他系泊点


联系南海

请填写下列信息

为了更好的沟通,请在下面留下您的联系电话给我们。






     

    NANHAI PNEUMATIC FENDER FEATURES AND STANDARD DIMENSIONS



    Yokohama充气式护舷内外胶材料特性:

    老化前检查方法外胶内胶
    抗拉强度ISO 37:199418Mpa以上18Mpa以上
    伸长ISO 37:1994400%以上400%以上
    硬度ISO 7619:199760±10 
    (硬度计硬度A型)
    50±10 
    (硬度计硬度A型)

     

    老化后试验方法

    ISO188:1998 70±1º x 96 小时

     检查方法 外胶 内胶
    抗拉强度ISO 37:1994原属性不低于80%原属性不低于80%
    伸长ISO 37:1994原属性不低于80%原属性不低于80%
    硬度ISO 7619:1997不超过原始属性 8不超过原始属性 8

     

      检查方法外胶内胶
    抗撕裂性ISO 34-1:1994400 N/cm 以上无要求
    压缩测试ISO 815:199130%(70±1ºC 22小时)或更少无要求
    静态臭氧老化试验ISO 1431-1:1989经 20% 伸长并在 40ºC 下以 50pphm 暴露 96 小时后无裂纹无要求


    Yokohama 充气式护舷 50(公制)标准尺寸

    性能参数表 

    公称尺寸直径 x 长度

    毫米 x 毫米

    初始内压

    千帕

    保证能量吸收 (GEA)

    kJ

    GEA 的反作用力

    kN

    GEA 的船体压力

    千帕

    安全阀设定压力

    千帕

    测试压力

    千帕

    大约挡泥板重量

    公斤

    大约净重

    公斤

    吊装重量(Ⅱ型)

    公斤

    500 × 100050664132-2002216032
    700 × 15005017137135-2004518555
    1000 × 15005032182122-2007325098
    1000 × 20005045257132-20088385113
    1200 × 20005063297126-200131430156
    1350 x 250050102427130-200200675240
    1500 × 300050153579132-200250795290
    1700 × 300050191639128-200290830330
    2000 x 350050308875128-2004051165465
    2000 x 4500504181188137-2004801700540
    2500 × 400050663138113717525090217451080
    2500 x 5500509432019148175250109027651320
    3300 x 45005011751884130175250146026501840
    3300 x 65005018143015146175250187038402250
    3300 x 10,6005030675257158175250256067553060
    4500 × 9000504752574714617525039407365-
    4500 x 12,000506473798415817525047909875-


    注释:

    1. 表中数据和单位均符合 ISO 17357国际标准
    2. 充气式护舷主体和网套的重量可能会有 ±10%浮动。
    3. 我们可根据客户要求提供特殊尺寸 


    横滨充气式护舷 80(公制)标准尺寸

    性能参数表 

    公称尺寸直径 x 长度

    毫米 x 毫米

    初始内压

    千帕

    保证能量吸收 (GEA)

    kJ

    GEA 的反作用力

    kN

    GEA 的船体压力

    千帕

    安全阀设定压力

    千帕

    测试压力

    千帕

    大约挡泥板重量

    公斤

    大约净重

    公斤

    吊装重量(Ⅱ型)

    公斤

    500 × 100080885174-2502416034
    700 × 15008024180177 -2504718557
    1000 × 15008045239160 -25076250101
    1000 × 20008063338174 -25092385117
    1200 × 20008088390166 -250135430160
    1350 x 250080142561170 -250205675245
    1500 × 300080214761174 -250277795317
    1700 × 300080267840168 -250316830356
    2000 x 3500804301150168 -2504131165473
    2000 x 4500805841560179 -2504881700548
    2500 × 4000809251815180230300101017451190
    2500 x 55008013172653195230300123027651460
    3300 x 45008016402476171230300172026502090
    3300 x 65008025323961191230300220038402570
    3300 x 10,6008042816907208230300303067553520
    4500 × 9000806633755119223030043807365-
    4500 x 12,0008090371049020223030053309875-


    注释:

    1. 表中数据和单位均符合 ISO 17357国际标准
    2. 充气式护舷主体和网套的重量可能会有 ±10%浮动。
    3. 我们可根据客户要求提供特殊尺寸 

    卓越的产品质量和合理的售价推动了我们产品在全球市场的推广。

    南海致力于帮助我们的客户取得成功。

    我们的专业团队能够提供最佳的交付选项和解决方案。较大尺寸的护舷通常会放气发货从而帮助您获得最经济的运输运费。

    发送邮件或者直接致电我们,我们的员工很荣幸为您服务。


    下载免费 PDF
    zh_CNChinese