How To Use A Pneumatic Fender12/05/2023
Pier Fender Classification12/12/2023
To use a ship launching airbag, follow these steps:
1.Preparation: Make sure you select the right ship launching airbag, with the correct size and quantity as needed. Check that the marine air bag is intact and does not have any damage or leaks.
2.Install the airbag: Lay the ship launching airbag flat on the water or the dock, and ensure that the ship launching airbag is placed vertically with the hull or shore. If necessary, ropes or straps can be used to secure the ship launching airbag to the hull.
3.Inflate the air bag: Connect the ship launching air bag to the inflating equipment and fill the ship launching airbag with air according to the instructions provided by the manufacturer. Pay attention to controlling the inflation speed and pressure to ensure that the ship launching airbag is evenly inflated and achieves proper buoyancy.
4.Ship Movement: When the ship launching airbag is filled with air and provides sufficient buoyancy, the ship can begin to move. Adjust the position and inflation volume of the ship launching airbag as needed to control the direction and speed of the ship.
5.Airbag deflation: After the ship reaches its destination or completes its mission, the ship launching airbag needs to be deflated and emptied. Use a deflation valve or other deflation device to gradually reduce the air pressure in the ship launching airbag so that the airbag gradually contracts.
6.Air bag storage: After use, clean your ship launching airbag and store it properly. Avoid exposure to sunlight, high temperatures and contact with sharp objects to extend the service life of your marine airbag.
It should be noted that when using ship launching airbags, strictly comply with relevant safety operating regulations and the guidance provided by the manufacturer. Depending on the specific situation and task requirements, professionals may be required to operate or provide guidance.